?1 sld343yt e00198b46 4w high power laser diode description the sld343yt has a compatible package, and allows independent thermal and electric design. it is a high power laser diode that affords easy optical design. features high-optical power output recommended optical power output: p o = 4.0w high-optical power density: 4w/200 m (emitting line width) applications solid state laser excitation medical use material processing measurement structure algaas quantum well structure laser diode operating lifetime mttf 10,000h (effective value) at po = 4.0w, tth = 25? absolute maximum ratings (tth = 25?) optical power output p o max 4.4 w reverse voltage v r ld 2 v pd 15 v operating temperature (tth) topr ?0 to +30 ? storage temperature tstg ?0 to +85 ? equivalent circuit sony reserves the right to change products and specifications without prior notice. this information does not convey any licens e by any implication or otherwise under any patents or other right. application circuits shown, if any, are typical examples illustr ating the operation of the devices. sony cannot assume responsibility for any problems arising out of the use of these circuits. m-288 te cooler case ld pd th 1345678910 warranty this warranty period shall be 90 days after receipt of the product or 1,000 hours operation time whichever is shorter. sony quality assurance department shall analyze any product that fails during said warranty period, and if the analysis results show that the product failed due to material or manufacturing defects on the part of sony, the product shall be replaced free of charge. laser diodes naturally have differing lifetimes which follow a weibull distribution. special warranties are also available. no. function 1 2 3 4 5 6 7 8 9 10 te cooler (negative) case laser diode (anode) thermistor thermistor laser diode (cathode) photo diode (anode) photo diode (cathode) te cooler (positive) pin configuration (top view)
?2 sld343yt electrical and optical characteristics (tth = thermistor temperature, tth = 25?) item symbol conditions min. typ. max. unit ith iop vop p ? // ? x, ? y ?? ? // d imon rth threshold current operating current operating voltage wavelength ? radiation angle positional accuracy differential efficiency monitor current thermistor resistance p o = 4.0w p o = 4.0w p o = 4.0w p o = 4.0w p o = 4.0w p o = 4.0w p o = 4.0w v r = 10v tth = 25? 790 10 5 0.5 0.2 1.0 4.6 2.0 23 10 1.1 1.0 10 2.0 6.5 3.0 840 35 15 100 ? ? 1.5 4.0 a a v nm degree degree ? degree degree w/a ma k ? perpendicular parallel position angle ? wavelength selection classification type sld343yt-1 sld343yt-2 sld343yt-3 wavelength (nm) 795 5 810 10 830 10 type sld343yt-21 SLD343YT-24 sld343yt-25 wavelength (nm) 798 3 807 3 810 3
?3 sld343yt example of representative characteristics optical power output vs. forward current characteristics tth = 25? i f ?forward current [a] 01.5 34.5 67.5 5 4 3 2 1 p o ?optical power output [w] far field pattern angle [degree] ?0 ?0 0 20 40 1.0 0.8 0.6 0.4 0.2 relative radiant intensity tth = 25? p o = 4.0w ? // oscillation wavelength wavelength [nm] 780 790 800 810 820 1.0 0.8 0.6 0.4 0.2 relative radiant intensity tth = 25? p o = 4.0w thermistor characteristics tth ?thermistor temperature [?] ?0 0 10 40 60 50 10 5 0 rth ?thermistor resistance [k ? ] 20 30 50 70 te cooler characteristics 40 q ?absorbed heat [w] 30 20 10 0 ? t ?temperature difference [?] 020406080 20 15 10 5 0 v t pin voltage [v] tth = 25? 3a 2a 1a 1a 2a 3a ? tvsv it = 4a ? tvsq it = 4a te cooler characteristics 40 q ?absorbed heat [w] 30 20 10 0 ? t ?temperature difference [?] 020406080 20 15 10 5 0 v t ?pin voltage [v] tc = 33? 3a 2a 1a 1a 2a 3a ? tvsv it = 4a ? tvsq it = 4a ? t tth tc : tc ?tth : thermistor temperature : case temperature ? t tth tc : tc ?tth : thermistor temperature : case temperature
?4 sld343yt notes on operation care should be taken for the following points when using this product. (1) this product corresponds to a class 4 product under iec60825-1 and jis standard c6802 "laser product emission safety standards". (2) eye protection against laser beams take care not to allow laser beams to enter your eyes under any circumstances. for observing laser beams, always use safety goggles that block laser beams. usage of ir scopes, ir cameras and fluorescent plates is also recommended for monitoring laser beams safely. (3) gallium arsenide this product uses gallium arsenide (gaas). this is not a problem for normal use, but gaas vapors may be potentially hazardous to the human body. therefore, never crush, heat to the maximum storage temperature or higher, or place the product in your mouth. in addition, the following disposal methods are recommended when disposing of this product. 1. engaging the services of a contractor certified in the collection, transport and intermediate treatment of items containing arsenic. 2. managing the product through to final disposal as specially managed industrial waste which is handled separately from general industrial waste and household waste. (4) prevention of surge current and electrostatic discharge laser diodes are most sensitive to electrostatic discharge among semiconductors. when a large current is passed through the laser diode for even an extremely short time, the strong light emitted from the laser diode promotes deterioration and then destruction of the laser diode. therefore, note that surge current should not flow to the laser diode driving circuit from switches and others. also, if the laser diode is handled carelessly, it may be destroyed instantly because electrostatic discharge is easily applied by a human body. therefore, be extremely careful about overcurrent and electrostatic discharge. (5) use for special applications this product is not designed or manufactured for use in equipment used under circumstances where failure may pose a risk to life and limb, or result in significant material damage, etc. consult your sony sales representative when investigating use for medical, vehicle, nuclear power control or other special applications. also, use the power supply that was designed not to exceed the optical power output specified at the absolute maximum ratings. laser radiation avoid eye or skin exposure to direct or scattered radiation laser diode laser diode avoid exposure laser radiation is emitted from this aperture. this product complies with 21 cfr part 1040.10 and 1040.11 sony corporation 6-7-35 kitashinagawa, shinagawa-ku,tokyo 141-0001 japan maximum output over 1 w wavelength 600 - 950 nm class iv laser product
?5 sld343yt package outline unit: mm package mass sony code eiaj code jedec code m-288 100g 4 ? 4.04 ?0.03 + 0.08 19.05 0.15 4 ?r1.0 4 ?r1.0 5.0 window glass 38.60 0.15 31.75 0.50 12.8 9 ? 1.0 2.54 44.45 0.50 ld chip 31.75 0.50 0.9 max 17.0 reference plane 19.30 0.15 3.0 14.9 0.3 17.8 0.3 1.0 26.4 3.6 m-288 sony corporation
|
